Xiamen BMS Group
Over 20 Years Professional Experience,China Taiwan Quality,China Mainland Price.
Add to Cart
Decorative Cable Channel Cold Roll Forming Machine 0.7-1.0mm Thickness
1. Details of Decorative Cable Channel Forming Machine
| Material |
| Material Thickness(&):0.7-1.0mm |
| Applicable material: Galvanized Steel Coils, Hot Rolled Coils, Cold Rolled Coils, yield strength 245Mpa or 550Mpa |
| Machine Components |
| 1)Manual Decoiler: one set |
| Max. feeding width: 500mm, coil ID range 470mm±30mm |
|
Capacity: Max. 3Ton
|
| 2) Cold Rolling Mills: |
|
Rollers manufactured from bearing steel GCr15, precision machined, hard Chrome Coated with thickness 0.04mm(for longer life and anti-rust) ;
|
| Motor Driving, Gear chain transmission, 11 forming stations and 7 rollers(3 upper rollers and 4down rollers)for straightening and leveling) |
| Main Motor=4KW, Frequency speed control |
| Forming speed of approx.12-18m/min |
| 3)Hydraulic Cutting device |
| hydraulic motor: 2.2KW, Hydraulic pressure range: 0-12Mpa |
| Cutting tool material: Cr12Mov, Heat treatment |
| Cutter frame made from high quality 20mm steel plate by weld |
| Pre-punching & Pre-cutting, stop punching, stop to cutting, |
| 4)PLC Control System(Touch screen brand: Taiwan WEINVIEW, Inverter brand: Finland VOCAN/Denmark Danfoss, Encoder brand: Japan Koyo) |
| Control the quantity and cutting length automatically |
| Combined with: PLC, Inverter, Touch Screen, Encoder, etc |
| Cut-to-length tolerance≤±1mm |
| Control Voltage 24V |
| 5) Exit Rack Un-powered, two units |
2. Machine Features of Decorative Cable Channel Forming Machine
The advantages of Decorative Cable Channel Forming Machine as follows:
1. Easy operation, low maintenance cost
2. Material saving
3. The type of panel is widely used.
4. High requirement for finished products