Standing Seaming Roof Panel Roll Forming Machine
Main Components
1. Manual Decoiler: one set
Un-powered, Manually control steel coil inner bore shrinkage and stop
Max. feeding width: 575mm, coil ID range 470mm±30mm
Capacity: Max.5Ton
2. Cold Rolling Mills:
Material Thickness:0.8-1.2mm,Material Width:575mm,
With feeding material guide, body frame made from 350# H type steel by welding, Sidewall thickness: 18mm
Rollers manufactured from 45#, precision machined, hard Chrome Coated
Shafts manufactured from 45#, Diameter=φ75mm, precision machined
Motor Driving, Gear chain transmission, 14 steps to form
Main Motor=7.5KW, Frequency speed control 380V/50Hz/3Ph
Forming speed of approx.15m/min
3.Hydraulic Cutting device
Cutter frame made from high quality 20mm steel plate by welding
Post cut, stop to cutting, use the same hydraulic motor drive
hydraulic motor: 2.2KW, Hydraulic pressure range: 0-18Mpa
Cutting tool material: Cr12, Heat treatment
4. PLC Control System(Touch screen brand: German Schneider Electric, Inverter brand: Taiwan DELTA, Encoder brand: Japan Koyo)
Control the quantity and cutting length automatically
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V
5. Exit Rack Un-powered, two units
| After-sales Service Provided |
Engineers available to service machinery overseas |
|
|
| Shaft |
75mm |
| Forming station |
14steps |
| Working material |
galvanized sheet(GI),cold roll steel(CRC) |
| Yield strength |
245-550Mpa |
| Decoiler |
Manual/Hydraulic for options |
| Housing |
H300 beam |
| Sidewall thickness |
16mm |
| Cutter material |
Cr12 Tool Steel |
| Feeding material |
320-650mm |
|
|
