Xiamen BMS Group
Over 20 Years Professional Experience,China Taiwan Quality,China Mainland Price.
Add to Cart
Cut to Length Roll Forming Machine for 0.5-3.0 Stainless Steel With Post Hydraulic Cutting
Characteristics of this machine
1. Auto forming and cutting at any length with a preset amount.
2. The signal feedback of the encoder shows the length of the product.
3. The control panel can calculate the total length of the finished coil.
4. Roll for alloy steel, CNC precision processing, hard chromium plating surface.
5. The cutting die is SKD11 steel, NC machining, heat treatment 55-60hrc.
The cut-to-length roll forming machine consists of a sturdy and stable frame and rollers, with a powerful cutting device and a slitting device, equipped with a PLC automatic control system and a gap adjustment device, which is convenient and efficient.
This cut-to-length roll forming machine is hydraulically driven and is used to cut or divide a metal flat plate into the required length and width.
With the leveling feeding device and encoder device, it automatically controls the length and number of pieces produced.
The thickness of the sidewall frame is 22mm, which is firm and firm. It is transported by the Japanese Yaskawa brand servo motor to ensure high precision.
Decoiler-Feeding Device-Leveling Device - Main Machine System - Hydraulic Post Cutting/HySlitting Device
Applicable material: Galvanized Steel(GI), Cold Roll Steel(CRC)
With Yield Strength: G235-550Mpa
Suitable Material thickness: 0.5-3.0mm
Width:1600mm
With Feeding Device
With Leveling Function
With Shearing Function
With PLC Control System
Main Machine Motor:11KW+3.7KW
Line Speed:20m/minute
The Length Of Tolerance:±1(2.5m)
With Up Five, Down Six Shafts Total eleven Shafts
Shafts manufactured from 45# steel, Quenching and tempering heat treatment, hard chrome plating.Diameter=φ105mm, precision machined
Wall Thickness: Q235 t30mm
Post cut, stop cut, two-piece blade design, no blanking
Hydraulic motor: 5.5kw;
Cutting pressure: 0-16mpa
Tool material :Cr12MoV(= SKD11)
Heat treatment to HRC58-62 degrees
The cutting power is provided by the main engine hydraulic station
The hydraulic system adopts an oil filter to filter the oil to ensure the cleanness of circulating oil and extend the service life of the hydraulic system.
| No. | Main Unit | Quantity |
| 1. | De-coiler(Manual type&Hydraulic type) | 1 Set |
| 2. | Cut-to-length Roll Forming Machine | 1 Set |
| 3. | Hydraulic Slitting&Cutting Device | 1 Set |
| 4. | PLC Control System(Delta brand) | 1 Set |
| 5. | Hydraulic Pump | 1 Set |
| 6. | Hydraulic motor | 1 Set |
| 7. | Clearance adjustment device | 1 Set |
| 8. | Rack out table | 2 Set |
Clearance adjustment device: Adjust the blade gap for precise cutting.
