C Lip Channel Roll Forming Machine C Size Auto Change Hydraulic Punching

I.General attributes:

1. Maximum roll forming speed: no less than 20 meters per minute

2. Bending accuracy: The maximum profile deviation (size and shape) shall not exceed the tolerance (or equivalent tolerance) specified in the following data;

3. Bending quality: It is possible to bend the profile of the specified configuration at the specified maximum steel thickness; the cracking of the steel or metal coating is not

II. Main Technical Specification of C Lip Channel Roll Forming Machine

Machine production process: Uncoiler→Feeding→forming station→Hydraulic station→post cutting system→Output table

Main Technical Specification of C Lip Channel Roll Forming Machine

III.Uncoiler

5T Hydraulic uncoiler

Coil inner diameter: variable, 480 mm to 570 mm

Maximum roll weight: 5000 Kg;

Expansion and combat mode: internal expansion and hydraulic combat

Feeding method: manual

Unwinding metal compensator: included to ensure uniform feeding at all production speeds;

Colour: blue+black(or according to customer requirements)

Quantity: 1

IV.Feed:

1. An adjustable forming roll centre having a length sufficient to prevent lateral movement of the strip as it enters the leveller.

2. Feeding type: adjustable

3.Guide rail and guide roller: diameter ¢65mm, chrome-plated

4. Quantity: 1

V.Cutting system

1. The transverse cutting device unit is configured to cut the curved profile without damaging the metal coating and to ensure smooth cutting;

2. Send the last cutting profile from the device: the automatic feeding;

3. Cutting after forming: cutting the sheet into the required length after forming

4. Operate with two hydraulic cylinders and include a flow regulator to achieve a uniform lowering knife.

5. Hydraulic cutting power, 7.5 KW

6. Working pressure: 0-14Mpa

7. The cutting sequence is also controlled and controlled by the same PLC program.

8. Length tolerance: +/- 1.5mm per final product

9. Quantity: 1

VI.Output table:

1.Frame: tube welding

2.Size: about 3.0 meters length

3.A table with a support roller

4.Quantity: 3 units

VII.Hydraulic station:

1. Hydraulic power:7.5kw

2. Working pressure: adjustable 14Mpa

3. Solenoid valve: 1 group

4. Hydraulic oil: 46# hydraulic oil

5. Colour: According to customer requirements

6. Quantity: 1

VIII. Control Cabinet:

Programmable contour length and number

1. Programmable cutting unit with various lengths in one programming cycle, no limit on number (does not stop operating the device): will be provided. Can set 2.5 sets of data at a time

3. The device will be automatically stopped after the cutting process is completed: will be provided.

4. Voltage, frequency, phase: 380 V, 50 Hz, 3 phase

5. The length is inaccurate and can be easily modified.

6. Control panel: push button switch and touch screen

7. Unit length: mm (open the control panel)

8.PLC brand: French Schneider Electric

9. Inverter brand: Yaskawa

10. Touch screen: French Schneider Electric

11.Colour: Yellow and blue

12. Quantity: 1